Filter
Top Products
Displaying IPX Characteristics
20-22 Managing IPX
Displaying IPX Characteristics
Using the SHOW command
Use the SHOW IPX CHARACTERISTICS command to display IPX characteristics,
including IPX network and node numbers. The command is nonprivileged.
IPX Characteristics Display
The following example shows the command to display IPX characteristics on an
access server:
Local> SHOW IPX CHARACTERISTICS
IPX Characteristics:
IPX: Enabled
LAN Node Address: 08002B24F2DD Internal Network: 2B24F2DD
LAN Frame: ETHERNET LAN Network: Learn
LAN Frame: RAW802 LAN Network: Disabled
LAN Frame: SAP802 LAN Network: Disabled
LAN Frame: SNAP802 LAN Network: Disabled
IPX Characteristics Display Fields
The following table describes the fields in the IPX characteristics display:
Field Description
IPX Enabled or Disabled. The default is Disabled.
LAN Node Address Maximum of 12 hexadecimal numbers (no leading
zeroes) representing the Ethernet interface’s hardware
address.