Preparing LAT Services for Initialization
5-2 Initializing the Access Server
Preparing LAT Services for Initialization
Do This
If the access server offers LAT services, follow these steps before you initialize:
The time that it takes for the queue to empty depends upon the number of requests that
it contains.
Step Action
1
Enter the following command to disable queuing on the access server:
Local> SET SERVER QUEUE LIMIT 0
2
Disable additional connections to local services. For example, the
following command disables the service LASER:
Local> SET SERVICE LASER CONNECTIONS DISABLED
3
Check that the queue is empty before starting the initialization
procedure by entering one of the following commands:
Local> SHOW QUEUE ALL
or
Local> SHOW SERVER STATUS