Filter
Top Products
Displaying PPP Counters
19-22 Configuring and Managing Point-to-Point Protocol (PPP) Ports
Displaying ATCP Counters
Use the SHOW PORT
n
ATCP Counters command to display ATCP counters for a
port. This command requires no privileges. The counters display shows all the counters
relevant to ATCP protocol operation. Most of this information is useful as a diagnostic
aid. The CONNECT or DISCONNECT command zeroes each of these counters.
Naks in The number of IPCP configure-naks received
from the peer.
Naks out The number of IPCP configure-naks sent to
the peer from the access server. This counter
should always be zero in this release.
Rejects in The number of IPCP configure-rejects
received from the peer.
Reject outs The number of IPCP configure-rejects sent to
the peer from the access server.
Terminates in The number of IPCP terminate-requests
received from the peer.
Terminates out The number of IPCP terminate-requests sent
to the peer from the access server.
Term Acks in The number of IPCP terminate-acks received
from the peer.
Term Acks out The number of IPCP terminate-acks sent to
the peer from the access server.
Field Description