Filter
Top Products
Checking Port Status and Counters
17-28 Managing the Access Server
Access Current setting of the ACCESS port characteristic.
Access determines how a port can access a service node
or how a port can be accessed by other interactive users
and service nodes. Access is shown as one of the
following:
• Dynamic — Access server allows access on the port
to alternate between local and remote.
• Local — Access server allows only interactive use of
the port.
• None — Access server prevents any use of the port.
• Remote — Access server allows only remote
connections on the port.
Port access is specified by using the SET/DEFINE/
CHANGE PORT command.
Status Current status of the port, which can be one of the
following:
• Connected — Port is connected to a service.
• Connecting — Port is attempting a connection to a
service.
• Disconnected — Session was terminated while
dormant.
• Disconnecting — Session is disconnecting from a
service.
• Idle — Port is not in use.
• Local Mode — Port is logged in to the access server
and is not connected to or connecting to a service.
• Locked — LOCK command was executed on the port.
• Signal Wait — The port failed to assert the DSR
signal during a signal check controlled connection
attempt.
• Sessions — Number of active sessions at the port.
• Current Service — Active service session or the
service session interrupted when the user last entered
local mode.
Current Node Node to which the current session is connected. If the
access is remote, this is the name of the node from which
the connection originated.
Field Description