Filter
Top Products
Checking Port Status and Counters
17-30 Managing the Access Server
SHOW/LIST/MONITOR PORT SUMMARY Display Fields
The following table describes the information under the headings in the SHOW/LIST/
MONITOR PORT SUMMARY display:
Heading Description
Port Number
n
of the port.
Access Current setting of the ACCESS port characteristic. Access
determines how a port can access a service node or how a port
can be accessed by other interactive users and by service nodes.
Access is shown by one of the following:
• Dynamic — Access server allows access to the port to
alternate between local and remote.
• Local — Access server allows only interactive use of the
port.
• None — Access server prevents any use of the port.
• Remote — Access server allows only remote connections on
the port. Port access is specified by using the SET/DEFINE/
CHANGE PORT command.
Status Current status of the port, which can be one of the following:
• Connected — Port is connected to a service.
• Connecting — Port is attempting a connection to a service.
• Disconnected — Session was terminated while dormant.
• Disconnecting — Session is disconnecting from a service.
• Idle — Port is not in use.
• Local Mode — Port is logged in to the access server and is
not connected to or connecting to a service.
• Locked — LOCK command was executed on the port.
• Permanent — Status that appears for the LIST command.
• Signal Wait — The port failed to assert the DSR signal
during a signal check controlled connection attempt.
Services
Offered
The local services that the access server offers on the port. Host-
initiated requests can be made for these services.