Filter
Top Products
Checking Port Status and Counters
17-24 Managing the Access Server
Checking Port Status and Counters
Introduction
The LIST/MONITOR/SHOW PORT command displays information about one or
more ports on the access server. You can obtain characteristics, counter, status, and
summary displays for ports.
Displaying Port Characteristics
The LIST/MONITOR/SHOW PORT CHARACTERISTICS command displays the
values of the characteristics of the selected ports. The bottom of the display lists all the
enabled port characteristics. Use the characteristics display when you are changing
settings.
The port number
n
in the display indicates that the port device is connected to
connector JN on the hardware unit. The server name is configured with the SET/
DEFINE/CHANGE SERVER NAME command. The other values can be changed
with the SET/DEFINE/CHANGE PORT command.
Reference
Refer to
Network Access Server Command Reference
for information on each
command.
Note
Some access servers have Modem Control instead of Signal Control. Also, Signal
Select is not available on all access servers.