Filter
Top Products
Configuring and Managing LAT Services 12-13
Configuring a Printer with Unannounced Availability
Configuring a Printer with Unannounced Availability
Introduction
This section describes how to configure a printer with unannounced availability. The
only users that know about the device’s availability are those users that you tell about
the device. By defining a port name and not a service name, you can configure a device
on the access server for access by users on a LAT network.
Configuring a Printer with Unannounced Availability
The example in this topic shows a sample configuration of a printer with unannounced
availability on a LAT network. You must configure the device and port characteristics,
as described in Chapter 9, before performing this procedure. The following are
variables in the example that you should substitute with the appropriate values:
• Access server port number
• Authorized and service groups
• Port name
You should change the port name to a descriptive term. This term should describe
the resource provided (for example, printer or file transfer). The port name must
be unique on the access server and follow the naming conventions described in the
Network Access Server Command Reference
.
Substitute MODEM CONTROL for SIGNAL CONTROL if your access server
supports MODEM CONTROL.
Reference
For a description of each command, refer to the
Network Access Server Command
Reference
.
Note
Not all commands can be combined on one line.