Filter
Top Products
Managing AppleTalk 8-5
Displaying AppleTalk Characteristics
Displaying AppleTalk Characteristics
Commands
Use the LIST APPLETALK CHARACTERISTICS command to display the
AppleTalk characteristics. This command is nonprivileged.
Use the SHOW/MONITOR APPLETALK STATUS command to see the values being
used operationally.
Displaying AppleTalk Characteristics Example
The following example shows how to display the latest values configured by the
DEFINE APPLETALK commands:
Local> LIST APPLETALK CHARACTERISTICS
AppleTalk Characteristics Server: LAT_08002B24F24F
State: Enabled
Cache Size: 2
Fields in the AppleTalk Characteristics Display
The following table describes the fields in the AppleTalk Characteristics display:
Field Description
State Indicates whether AppleTalk is enabled the
next time you initialize the access server.
Cache Shows the number of AppleTalk addresses
that the access server will acquire in cache
memory the next time you initialize the
access server.