Filter
Top Products
Managing Access Server Security 22-31
Determining Security Configuration
Showing the Authentication Counters
This access server can display the counters for all realms (local, RADIUS,
KERBEROS). Any session authenticated by RADIUS attempts to send accounting
data to the RADIUS Server. Sessions authenticated by other methods may be
configured to send accounting packets to a RADIUS accounting server as well (if one
exists).
Reference
See SHOW AUTHENTICATION COUNTERS in the
Network Access Server
Command Reference
for a sample of this display.
Showing the User Port Authorization Profile
The SHOW AUTHORIZATION command shows the user profile being used for the
specified port(s).
Example: Showing the User Port Authorization Profile
The following example shows the resulting display for this command for a port that
was authenticated:
LOCAL> SHOW PORT 7 AUTHORIZATION
Port 7: user1 Server: DECSERVER1
Username: user1@finance_realm
Access: LOCAL Forced CallBack: DISABLED
Max Connect: 00 08:00:00 DialOut Service: DIAL14400
Remaining Time: 00 00:33:24 Framed IP Address: 16.22.33.44
Login IP Host: 16.20.22.33 Login LAT Service: LATSERVICE
Login Service Type: LAT Login Port: 15
Authenticated By: 16.129.42.15 Authentication Type: RADIUS
Login LAT Node: MONEY
DialOut Number: (Any)
DialBack Number: 1-802-767-8345
Login LAT Groups: 1,2,5,66-68,133,135,139,172,206,230-250
Permissions: LAT, TELNET, SLIP, PPP, DIALACK,
DIALOUT,NONPRIVILEGED
Showing Security Counters
The SHOW/LIST/MONITOR SECURITY COUNTERS command displays all port-
related security counters. This display is very similar to results from the SHOW PORT
AUTHENTICATION COUNT command shown in the previous example.
Example: Showing Security Counters
Local> SHOW PORT 8 SECURITY COUNTERS