Initializing the Access Server 5-1
Chapter 5
Initializing the Access Server
Overview
Introduction
This chapter describes how to initialize the access server. Initializing the access server
reloads the software image.
Initializing the access server does not affect the configuration settings stored in
NVRAM. To reset the access server to the factory-set defaults, you need to reboot the
access server and press the appropriate switch on the hardware unit. For details about
this procedure, refer to the hardware documentation provided with the access server.
In This Chapter
This chapter contains the following topics:
• Preparing LAT Services for Initialization
• Preparing Telnet Listeners for Initialization
• Initializing the Access Server
• Using NCP to Initialize the Access Server
• Booting from the Network
• Booting Using Console Commands