Filter
Top Products
Configuring LAT Characteristics 6-7
IDENTIFICATION Characteristic
IDENTIFICATION Characteristic
Introduction
The IDENTIFICATION characteristic is a string that can be up to 40 characters long.
This string displays:
• Under the welcome banner during a login procedure
• In the SHOW SERVER displays
The access server also uses the identification string when it multicasts messages about
the availability of services.
Changing the Server Identification String
To change the server identification string, use the following command:
Local> CHANGE SERVER IDENTIFICATION "
newID
"
Removing an Identification String
To remove an identification string, specify a null string by using the following
command:
Local> CHANGE SERVER IDENTIFICATION ""
The null string is the default identification string.
Identification String in a Login Procedure Display
The following example shows how the identification string Personnel Printers displays
during a login procedure:
Network Access SW Vx.x for DSxxx-xx BLxx-xx ROM Vx.x-x Uptime: 0
00:16:58 Personnel Printers
(c) Copyright 1996, Digital Equipment Corporation - All Rights
Reserved
Please type HELP if you need assistance
Enter username>