Filter
Top Products
Remote Console Port
2-8 Management Tools
OpenVMS Utility
—
Terminal Server Manager
For OpenVMS systems, DIGITAL offers the Terminal Server manager (TSM) to
facilitate managing the access server using the MOP remote console. TSM allows the
user to store access information such as the maintenance password, Ethernet address,
and login password for a server in a local database. The user can then establish a simple
USER SERVER command and TSM will retrieve the information and establish a
remote connection to the MOP console of the targeted server. Since TSM supports
command scripts a highly automated interface to the MOP remote console can be
created.
Network Control Program (NCP)
NCP enables you to connect to the remote console port from an OpenVMS DECnet
node that is on the same Ethernet as the access server. The node must be running
DECnet Phase IV software, but does not need to be a LAT service node or a load host
for your access server.
Usage Considerations
Consider the following when using NCP:
• Do not confuse the SERVICE PASSWORD that you enter in an NCP command
with the access server SERVICE PASSWORD. They are unrelated.
• If the access server requires that you specify the maintenance password and you
omit it, NCP displays this error message:
Target does not respond
To disconnect from the access server, press Ctrl/D. To
exit NCP, type EXIT or press Ctrl/Z.
For additional information about NCP, refer to the documentation provided with your
system.