Filter
Top Products
Managing Accounting
23-12 Accounting
Changing the Accounting Threshold
Use the ACCOUNTING THRESHOLD command to specify the point in the building
of a log when the accounting component sends out a threshold notification.Valid
values for the ACCOUNTING THRESHOLD variable are:
•
NONE: No notification.
•
HALF: Notify when each half of the log file is reached.
•
QUARTER: Notify when each quarter of the log file is reached.
•
EIGHTH: Notify when each eighth of the log file is reached.
•
END: Notify when the end of the log file is reached.
Entries are inserted in the log file progressively (with wrapping) and when the
specified points in the buffer are reached, notifications are sent. These notifications are
in the form of SNMP traps.
Example: Changing the Accounting Threshold
The following example shows the use of the DEFINE ACCOUNTING THRESHOLD
command:
Local> DEFINE ACCOUNTING THRESHOLD EIGHTH
Changing the Accounting Console
Use the DEFINE ACCOUNTING CONSOLE command to display accounting events
on the server console. If ENABLED, the accounting component displays accounting
events on the server console port as they occur. Be sure to set the server console port
to the desired value (CHANGE SERVER CONSOLE
n
).
Example: Changing the Accounting Console
The following example shows the use of the DEFINE ACCOUNTING CONSOLE
command:
Local> DEFINE ACCOUNTING CONSOLE ENABLED