Filter
Top Products
Configuring and Managing Interactive Devices 11-41
Managing Users
SHOW/LIST/MONITOR USERS Display Headings
The following table provides an explanation of the information in the display in the
previous example:
Specifying User Groups
Nonprivileged users can choose the groups they require for their ports by using the
SET PORT GROUPS command. Users must choose from the groups you authorized
for their ports. The SET PORT GROUPS command limits user access to those services
made available by the groups specified with the command. The command serves to
shorten the node and service displays.
The SHOW PORT CHARACTERISTICS command displays the user-specified
groups, listing them in the field labeled (Current) Groups. Current groups apply only
to those ports with ACCESS set to LOCAL; current groups are ignored for those ports
with ACCESS set to REMOTE.
Heading Description
Port Number of the port.
Username Any user name or the name of the port established by the PORT
NAME characteristic.
Note: Any port having the user name “(Remote)” designates a
remote-access session in progress.
Status Status of the port, which can be one of the following:
Connected Port is connected to a service.
Connecting Port is attempting to connect to a service.
Disconnected Session was terminated while dormant.
Disconnecting Session is disconnecting from a service.
Signal Wait The port failed to assert the DSR signal
during a signal check controlled
connection attempt.
Idle Port is not is use.
Local Mode Port is logged into the access server and
is in local mode.
Locked The user has entered the LOCK
command to LOCK the port.
Service Name of the user’s current session.