Configuring DTR and DSR Signals
10-22 Configuring Modem Signals
Port is logged out if DSR is deasserted after
initial assertion.
DTR is deasserted for 5 seconds minimum as
a consequence of a logout. DTR can only be
reasserted when a connection is accepted.
Reception of asynchronous data is not
accepted unless DSR and DTR are asserted.
Port status indicates “Signal Wait” if
connections cannot be accepted because DSR
is deasserted.
Solicited remote connection is not accepted
unless DSR is asserted.
SIGNAL CONTROL and
DSRLOGOUT
Same as SIGNAL CONTROL.
SIGNAL CONTROL,
SIGNAL CHECK, and
DSRLOGOUT
Same as SIGNAL CONTROL and SIGNAL
CHECK.
SIGNAL CONTROL,
DTRWAIT, and
DSRLOGOUT
Same as SIGNAL CONTROL and
DTRWAIT.
SIGNAL CONTROL,
SIGNAL CHECK, DTRWAIT,
and DSRLOGOUT
Same as SIGNAL CONTROL, SIGNAL
CHECK, and DTRWAIT.
SIGNAL CHECK and
DSRLOGOUT
Same as SIGNAL CHECK.
Enabled Characteristic DTR and DSR Actions