Filter
Top Products
Configuring and Managing Point-to-Point Protocol (PPP) Ports 19-23
Displaying PPP Counters
Example: Command to Display the ATCP Counters
The following example shows how to display the ATCP counters:
Local> SHOW PORT 5 ATCP COUNTERS
Port 5: Server: LAT_08002B26AA94
ATCP Counters:
Negotiation Successes: 0
Negotiation Failures: 0
Configures in: 8 Configures out: 12
Acks in: 6 Acks out: 6
Naks in: 0 Naks out: 1
Rejects in: 6 Rejects out: 1
Terminates in: 0 Terminates out: 0
Term Acks in: 0 Term Acks out: 0
Fields in the ATCP Counters Display
The following table describes the fields in the ATCP counters display:
Field Description
Negotiation
Successes
The number of times that ATCP has successfully entered a
round of negotiations to bring up AppleTalk since the link
was brought up. Ordinarily the value of this counter is 1.
However, you can reconfigure ATCP and then cause
ATCP to renegotiate. This changes the performance
characteristics for the link.
Negotiation
Failures
The number of times that ATCP tried to negotiate the link,
but failed.
Configures in This is the number of ATCP configure-requests received
from the peer.
Configures out The number of ATCP configure-requests sent to the peer
from the access server.
Acks in The number of ATCP configure-acks received from the
peer.
Acks out The number of ATCP configure-acks sent to the peer from
the access server.