Filter
Top Products
Managing IPX 20-11
Summary of DECserver IPX Management Commands
Summary of DECserver IPX Management Commands
The following are the network access server commands you can use to manage IPX.
Port PPP IPX Commands for LCP
The following table explains the PORT PPP IPX commands for LCP.
SHOW/LIST/MONITOR
PORT
n
LCP
Description
CHARACTERISTICS Display the current values for the LCP
characteristics.
SHOW/MONITOR PORT
n
LCP
Description
COUNTERS Display the current values of the IPXCP
counters.
STATUS Display the current values of the IPXCP
counters and characteristics.
CHANGE/SET/DEFINE
PORT
n
LCP
Description
ACFC Address and Control Field Compression for
PPP datagram.
AUTHENTICATION Password authentication is enabled.
ENABLE Enable LCP.
DISABLE Disable LCP.
MAP Specifies characters that may not be sent in
the clear.
MAXFAILURE Number of times LCP sends NAK before
rejecting option.
MAXTERMINATE Number of times LCP sends terminate
request without ACK.
MRU Maximum receive units.
PASSIVE When enabled, LCP must be initiated by
attached device.