Filter
Top Products
Assigning the Dialer Script to a Port
21-6 Managing Dial Services
Assigning the Dialer Script to a Port
Steps
After configuring the dialer strings in a dialer script, assign the script to a specific port.
Do the following:
Determining the Current Dialer Script
Use the SHOW PORT
n
command to display information about specific ports and their
current configuration. The SHOW PORT command helps you to determine how a port
is configured before you begin making changes to that port.
Step Action
1
Are you defining the dialer script to the port for the first time?
• If yes, go to step 2.
• If no, use the SHOW PORT
n
command to determine the current
dialer script by showing the port (optional). If you assign a dialer
script to a port that already has an assigned dialer script, the access
server overwrites the first dialer script. When you change or set a
dialer script, it is a good idea to check to see if one is in use.
2
Assign the new dialer script to the desired port using the DEFINE
PORT
n
DIALER SCRIPT command.