Filter
Top Products
Initializing the Access Server 5-11
Booting Using Console Commands
B/M This command boots the
maintenance mode software for the
access server. The network load
host defines this software and is
typically based on the Ethernet
MAC address of the access server.
–
B/S This command boots the standard
system software for the access
server. The network load host
defines this software and is typically
based on the Ethernet MAC address
of the access server.
–
H This command displays the help text
that describes the interactive boot
mode commands.
–
I This command initializes the access
server using the default boot
parameters. The access server
performs all normal self-tests.
–
R This command resets the factory-
settings and initializes the access
server. This command requires
verification. Enter YES if you want
to reset the access server to factory
settings.
–
Option Definition Associated Options