Filter
Top Products
Managing Your Access Server As Part of the LAT Network
17-8 Managing the Access Server
Viewing LAT Node Summary Information
The SHOW NODE SUMMARY command produces a line of information for each
selected service node. This display is useful to determine if a service node is reachable.
The node summary is the default display class for the NODE and NODE ALL entity
specifications.
Every service node name and access server name should be unique so as to allow other
service nodes and users to distinguish among access servers. A unique access server
name is necessary for an access server that is used for queued connection requests or
for an access server to act as a service node.
The access server knows a service node by the node’s Ethernet address and node name.
If you use the SET/DEFINE/CHANGE SERVER NAME command and you specify
an access server name that is already being used by another node, other LAT nodes
may replace your access server name with a default LAT name to make your access
server name unique. The default is in the following format:
LAT
nnnnnnnnnnnn
The value
nnnnnnnnnnnn
is the unhyphenated, 12-digit Ethernet address of the second
service node, which is used on the node summary displays.
Ports with LIMITED VIEW
Ports with LIMITED VIEW enabled cannot perform SHOW NODES.
Solicitations Rejected Number of queued connection requests that the
access server has rejected. The sum of the number
of solicitations accepted and the number of
solicitations rejected equals the number of queued
connection requests that were received by the
access server. A rejected request might indicate a
configuration problem at the access server or
service node; for example, the port names do not
match or a port has the incorrect access type.
Field Description