Filter
Top Products
Displaying AppleTalk Counters
8-6 Managing AppleTalk
Displaying AppleTalk Counters
Command
Use the SHOW/MONITOR APPLETALK COUNTERS command to display the
AppleTalk counters on an access server. The command is nonprivileged.
Displaying AppleTalk Counters Example
The following example shows a typical display when you enter the SHOW
APPLETALK COUNTERS command:
Local> SHOW APPLETALK COUNTERS
AppleTalk Counters Seconds Since Zeroed: 18207
AARP
Unsent Probes: 0 Unsent Responses: 0
DDP
In Receives: 5510 Out Requests: 19
In Local Datagrams: 1 Forwarded Requests: 0
Too Short Errors: 0 Out Shorts: 0
Too Long Errors: 0 Out Longs: 19
No Protocol Handlers: 0 Out No Routes: 0
Checksum Errors: 0 Hop Count Errors: 0
Short DDP Errors: 0 Broadcast Errors: 0
NBP
Lookups Received: 1850 Lookup Replies: 13
In Errors: 0
RTMP
Router Lost: 0 In Errors: 0
ZIP
In GetNetInfo Response: 1 Out GetNetInfo Requests: 6
In Errors: 0
Fields in the AppleTalk Counters Display
The following table describes the fields in the AppleTalk Counters display:
Field Description
AARP Unsent Probes The number of AARP probes that could
not be sent due to insufficient access
server resources.