Filter
Top Products
Accounting 23-5
What Events Are Logged?
Port • For session connect/disconnect events:
—
Local Access:
The port the session connect or disconnect
occurred on. If the connection is initiated from a physical port,
this field will have the physical port number. If the connection
is initiated from an existing remote console connection, the port
number will be one higher than the maximum physical port
number.
—
Remote Access:
For a remote console connection (MOP or
Telnet), the port will be one higher than the maximum physical
port number. For a connection to a LAT service or Telnet
listener (other than listener 23), the port will be the destination
physical port the connection is made to. If no port is available,
the port field will be zero.
Note:
If a connection is created from a physical or remote console
port to a Telnet listener or LAT service on the same server, two
session connect events will be logged: one for the local access from
the source port and one for the remote access to the destination port.
Two disconnect events will also be logged when the session is torn
down. In each log entry, the port number will follow the rules stated
above.
• For nonsession events, the port that the event occurred on.
ID The internal ID associated with an active session (not those that are
displayed in the SHOW SESSION displays). The session IDs are
always unique across the server at any given time (though they may
be reused after a session is disconnected).
Field Description