Setting the TCP Keepalive Timer
7-20 TCP/IP Network Characteristics
Retry Set Example
The following example show how to set the maximum number of keepalive probes that
the access server sends (10):
Local> CHANGE INTERNET TCP KEEPALIVE RETRY 10
Displaying Timer Characteristics
Use the SHOW/LIST INTERNET command to display the TCP keepalive timer
characteristics.
Timer Characteristics Display
The following shows an example of the display. If you disable the timer, the value for
the Keepalive Timer field is DISABLED.
Local> SHOW INTERNET
State Enabled
Internet Address: 195.1.1.1
Subnet Mask: 255.255.255.0
DHCP: Enabled
TCP Keepalive Timer: 60
TCP Keepalive Retry: 10
Local>