Filter
Top Products
Configuring and Managing 3270 Terminal Emulation (TN3270) 18-19
Commands to Manage TN3270 Terminal Emulation
Commands to Manage TN3270 Terminal Emulation
Introduction
This section summarizes the commands to manage 3270 emulation.
Reference
For a complete description of these commands and the correct syntax, refer to the
Network Access Server Command Reference
.
TN3270 Access Server Characteristics
The following table summarizes the TN3270 commands that configure access server
characteristics:
Command Description Default
SET/DEFINE/
CHANGE TN3270
ATOE
Changes the ASCII-
to- EBCDIC
translation for the
code specified.
For the default ASCII-
to-EBCDIC translation
table, refer to the
Network Access Server
Command Reference
.
SET/DEFINE/
CHANGE TN3270
ETOA
Changes the
EBCDIC-to-ASCII
translation for the
code specified.
For the default
EBCDIC-to-ASCII
translation table, refer to
the
Network Access
Server Commands
Reference
.
SET/DEFINE/
CHANGE TN3270
TERMINAL
Creates an access
server-wide
customized TN3270
terminal or renames
an existing keymap
for a terminal.
For the default
KEYMAP, refer to the
Network Access Server
Command Reference
.
CLEAR/PURGE
TN3270 TERMINAL
Clears dynamic or
permanent memory of
a customized 3270
terminal.
None
SET/DEFINE/
CHANGE TN3270
KEYMAP
Customizes
keymappings for an
existing access server-
wide keymap.
None