Filter
Top Products
Sample Modem Configurations
10-16 Configuring Modem Signals
Configuring a Dial-Out Modem on a Full MODEM CONTROL Server
The following example provides a sample configuration for a dial-out modem
operating at 1200 baud with an ALTERNATE SPEED of 300 baud:
Local> DEFINE PORT 3 ACCESS REMOTE AUTOBAUD DISABLED
Local> DEFINE PORT 3 AUTOPROMPT DISABLED BREAK DISABLED
Local> DEFINE PORT 3 DSRLOGOUT DISABLED DTRWAIT ENABLED
Local> DEFINE PORT 3 MODEM CONTROL ENABLED SIGNAL CHECK DISABLED
Local> DEFINE PORT 3 SPEED 1200 ALTERNATE SPEED 300
Local> LOGOUT PORT 3
Configuring a Dial-In and Dial-Out Modem on a Full MODEM CONTROL
Server
The following example provides a sample configuration for a dial-in and dial-out
modem operating at 2400 baud:
Local> DEFINE PORT 4 ACCESS DYNAMIC AUTOBAUD DISABLED
Local> DEFINE PORT 4 DSRLOGOUT DISABLED FLOW CONTROL XON
Local> DEFINE PORT 4 INACTIVITY ENABLED MODEM CONTROL ENABLED
Local> DEFINE PORT 4 PASSWORD ENABLED SIGNAL CHECK DISABLED SPEED
2400
Local> LOGOUT PORT 4