Filter
Top Products
Configuring Basic Device Characteristics
9-2 Configuring Basic Device Characteristics
Configuring Basic Device Characteristics
Introduction
If you attach a standard DIGITAL video terminal to an access server port, the basic
device characteristics described in this chapter are the only ones that you need to
consider.
If you are configuring a port to communicate with a modem, PC, computer interface,
or nonstandard terminal, refer to the signal characteristics described in Chapter 10 in
addition to the characteristics described in this chapter.
Command
To configure or modify a basic device characteristic, use the SET/CHANGE/
MODIFY command for the appropriate characteristic.
Basic Device Characteristic Summary
The following table summarizes the basic device characteristics, and refers you to
related information in this chapter:
Characteristic Default Allowed
Values
Refer to
Section
ACCESS Local Local, Remote,
Dynamic, None
Configuring the
ACCESS
Characteristic
AUTOBAUD Enabled Enabled, Disabled AUTOBAUD
CHARACTER SIZE 8 7, 8 CHARACTER
SIZE
DSRLOGOUT Disabled Enabled, Disabled Specifying
DSRLOGOUT
FLOW CONTROL XON XON, DSR, CTS,
DISABLED
Flow Control
Types
INACTIVITY
LOGOUT
Disabled Enabled, Disabled Specifying
INACTIVITY
LOGOUT
INPUT FLOW
CONTROL
Enabled Enabled, Disabled FLOW
CONTROL
Direction