Filter
Top Products
Displaying PPP Characteristics
19-6 Configuring and Managing Point-to-Point Protocol (PPP) Ports
Fields in the LCP Characteristics Display
The following table explains the fields in the LCP characteristics display.
Field Description Values Default
LCP Indicates if LCP is
enabled.
Enabled
Disabled
Enabled
Passive Open When enabled, LCP
negotiation does not
begin until initiated by
the attached device.
Enabled
Disabled
Disabled
Restart Timer Indicates the amount of
time between LCP
configure- or terminate-
request retransmissions
when there is no
response.
1 to 5 attempts 3
Max Configure The number of times that
LCP sends a configure-
request packet to the peer
without receiving an
acknowledgment.
1 to 15
attempts
10
Max Terminate The number of times that
LCP sends a terminate-
request packet to the peer
without receiving an
acknowledgment.
1 to 15
attempts
2
Max Failure The number of times that
LCP sends a negative
acknowledgment for the
peer’s proposed options
before deciding to reject
the options.
1 to 15 seconds 10
MRU The current MRU value. 64 to 1500 1500
Character Map The current character
map.
0 to FFFFFFFF FFFFFFFF
Authentication The current
authentication
configuration.
Disabled, PAP,
CHAP
Disabled
Link Quality* The current link quality. Disabled Disabled