Filter
Top Products
Managing AppleTalk 8-11
Displaying AppleTalk Status
Up AppleTalk is fully operational.
Address The AppleTalk address of the access
server, learned from the EtherTalk
network at initialization. Its value is 0.0
until the Learning state.
Network The AppleTalk network range the access
server learned at initialization. If no
AppleTalk router is on the access
server’s network, the value is 1-65534.
The value is 0-0 until the Learning state.
Name The full AppleTalk name of the access
server consists of: object:type@zone.
Object The unique name of the access server
(for example, LAT 08002B24F24F).
You can configure this parameter with
the SET/DEFINE/CHANGE SERVER
NAME command.
Type The type of device (for example,
DECserver 700-08). This parameter
cannot be configured.
Zone The zone to which the access server
belongs. This is a learned parameter and
cannot be configured.
Cache The current address cache size.
Attached Hosts The number of AppleTalk hosts attached
to the access server via asynchronous
lines.
Last Error The last AppleTalk error reported.
Field Value Description