Filter
Top Products
Configuring and Managing LAT Services 12-17
Managing Your Access Server As a LAT Node Offering a Service
Example: SHOW SERVICE CHARACTERISTICS Display
The following example below shows how to generate a service characteristics display
for the service named PRINTER:
Local> SHOW SERVICE PRINTER CHARACTERISTICS
Service: PRINTER
Identification: Printer Ports to PEACH
Ports: 1-3, 5, 7
Rating: 255
Enabled Characteristics:
Connections, Password, Queuing
Local>
SHOW/LIST/MONITOR SERVICE CHARACTERISTICS Display Fields
The following table describes the fields displayed in the service characteristics display:
Field Description
Service Name that identifies the network service.
Identification Service identification string. This string is usually a
short description of the service or of how to use it.
The following fields are displayed only for services offered by the access server
(local services):
Ports Numbers of the ports at which the local service is
offered.
Rating Rating at which the access server offers this service.
If any ports that offer the service are available, the
rating is proportional to the number of available ports.
If no ports are available that offer the service and if
queuing is enabled for the service, the rating is
proportional to the number of unused positions in the
connection queue.
Enabled characteristics Characteristics that can be enabled with the
CHANGE SERVICE command. The access server
displays only those characteristics that are enabled for
local services.
Connections Access server allows
connections to this
service.