Filter
Top Products
Console Port
2-6 Management Tools
Console Port
Displaying Port Parameters
The console port receives the access server system messages. An access server can
have only one console port at a time. The default console port number is 1. To change
the console port, use the SET/DEFINE/CHANGE CONSOLE PORT command.
To find out the current port number for the console port, use the SHOW SERVER
command.
Reference
The console port helps with troubleshooting as described in the
Network Access Server
Problem Solving
manual.
Example: SHOW SERVER Command
The following example shows how to display the current port number for the console
port. The value in for the Console Port characteristic in the display is the current port
number.
Local> SHOW SERVER
Network Access SW Vx.x for DSxxx-xx BLxx-xx ROM Vx.x-x Uptime: 0 00:16:18
Address: 08-00-2B-26-AA-99 Name: WWDOCMC Number: 0
Identification:
Circuit Timer: 80 Password Limit: 3
Console Port: 1 Prompt: Local>
Inactivity Timer: 30 Queue Limit: 100
Keepalive Timer: 20 Retransmit Limit: 8
Multicast Timer: 30 Session Limit: 64
Node Limit: 200
S
oftware: WWENG2
Service Groups: 42, 46, 66
Enabled Characteristics:
Announcements, Broadcast, Dump, Lock