Filter
Top Products
Management Tools 2-3
Access Server Commands
User Groups
For practical purposes, the access server command set syntax is divided into command
groups. These groups are:
• Command descriptions
• CLEAR/PURGE commands
• SET/DEFINE/CHANGE commands
• SHOW/LIST/MONITOR commands
In the above list, the command descriptions group includes any command that does not
functionally fit into the CLEAR/PURGE, SET/DEFINE/CHANGE or SHOW/LIST
MONITOR groups (for example, DIAL, CONNECT, SEND, and LOOP).
Command Definitions
The following table describes the commands for the CLEAR/PURGE, SET/DEFINE/
CHANGE and SHOW/LIST/MONITOR groups:
1. VRAM is the server’s volatile operational database.
Command Result
DEFINE Changes NVRAM (nonvolatile random access memory). The
system must be reinitialized for the changes to take effect.
SET Changes VRAM.
1
CHANGE Changes both NVRAM and VRAM.
SHOW Displays current status or information about various options
from the access server operational database.
MONITOR Displays continuously updated access server information on
various options. Type any character to stop a monitor display.
The MONITOR command displays have the same format as the
corresponding SHOW command displays, but requires the user
to be privileged.
LIST Displays information about various options from the server’s
permanent database.
CLEAR Changes VRAM.
PURGE Changes NVRAM.