Filter
Top Products
Displaying PPP Status
19-14 Configuring and Managing Point-to-Point Protocol (PPP) Ports
Displaying IPCP Status
Use the SHOW PORT
n
PPP IPCP STATUS command to display IPCP status. This
command shows the actual state of the IPCP implementation in the access server.
Because of the nature of PPP negotiations, this display can differ from the configured
characteristics shown on the SHOW PORT
n
PPP IPCP CHARACTERISTICS
display.
The display fields in fall into two categories:
• General IP status over the link (IPCP Status section)
• Status of each IPCP option (IPCP Options section)
Example: IPCP Status Display
The following example shows the IPCP status display for port 5:
Local> SHOW PORT 5 PPP IPCP STATUS
Port 5: Server: LAT_08002B26D0E7
IPCP Status:
State: Initial
Negotiation Time: 0 00:00:00
Since Open: 0 00:00:00
Failure Reason: None
IPCP Options: Local: Remote:
Negotiate Address: Disabled Disabled
IP Address: 0.0.0.0 0.0.0.0
Compress Header: Disabled Disabled
Compress States: 0 0