Filter
Top Products
Configuring and Managing Point-to-Point Protocol (PPP) Ports 19-21
Displaying PPP Counters
Example: Command to Display the IPCP Counters
The following example shows how to display the IPCP counters for port 5:
Local> SHOW PORT 5 IPCP COUNTERS
Port 5: Server: LAT_08002B26D0E7
IPCP Counters:
Negotiation Successes: 0
Negotiation Failures: 0
Configures in: 0 Configures out: 0
Acks in: 0 Acks out: 0
Naks in: 0 Naks out: 0
Rejects in: 0 Rejects out: 0
Terminates in: 0 Terminates out: 0
Term Acks in: 0 Term Acks out: 0
Fields in the IPCP Counters Display
The following table describes the fields in the IPCP counters display:
Field Description
Negotiation Successes The number of times that IPCP has
successfully entered a round of negotiations
to bring up IP since the link was brought up.
Ordinarily the value of this counter is 1.
However, you can reconfigure IPCP and then
cause IPCP to renegotiate. This changes the
performance characteristics for the link.
Negotiation Failures The number of times that IPCP tried to
negotiate the link, but failed.
Configures in This is the number of IPCP configure-
requests received from the peer.
Configures out The number of IPCP configure-requests sent
to the peer from the access server.
Acks in The number of IPCP configure-acks received
from the peer.
Acks out The number of IPCP configure-acks sent to
the peer from the access server.