Filter
Top Products
Specifying the Automatic Logout Characteristics
9-14 Configuring Basic Device Characteristics
Specifying INACTIVITY LOGOUT
The INACTIVITY LOGOUT characteristic allows you to enable or to disable
automatic log out for the port. If INACTIVITY LOGOUT is enabled, the access server
automatically disconnects the session and logs out the port if there is no input or output
activity for the time specified by the INACTIVITY TIMER characteristic.
Example: Enabling INACTIVITY LOGOUT
The following example shows how to enable INACTIVITY LOGOUT on port 5:
Local> CHANGE PORT 5 INACTIVITY LOGOUT ENABLED
Specifying the INACTIVITY TIMER
The INACTIVITY TIMER characteristic specifies the timeout period for all ports.
You use the INACTIVITY TIMER characteristic when you enable the INACTIVITY
LOGOUT characteristic.
The range for the timeout is from 1 to 120 minutes. The default is 30 minutes.
Example: Changing the INACTIVITY Timeout Period
The following command shows how to change the timeout period:
Local> CHANGE SERVER INACTIVITY TIMER 15