Filter
Top Products
Managing Users
11-42 Configuring and Managing Interactive Devices
Current groups (user-specified groups) are stored only in the operational database.
Therefore, users must use the SET PORT command to configure these groups; users
cannot use the DEFINE PORT or CHANGE PORT command.
Current groups are always equal to or a subset of the AUTHORIZED GROUPS. If a
user enters SET PORT GROUPS ALL, the current groups consist of all the enabled
authorized groups.
The access server uses the current groups for these functions:
• Checking authorization when the user enters a CONNECT command on the
access server
• Displaying information with the SHOW NODES and SHOW SERVICES
commands
Example: Assigning User Groups
The following example shows the command for nonprivileged users to assign groups
from among their authorized groups:
Local> SET PORT GROUPS 5
If the authorized groups for the port were groups 4 to 7, the user can only access group
5 after executing the command. In addition, the SHOW SERVICES command shows
only the information for services and nodes in group 5, and the SHOW PORT
CHARACTERISTICS command shows the groups assigned to the port in the
(Current) Groups field.