Filter
Top Products
Displaying SLIP Counters
15-14 Configuring and Managing SLIP Ports
Displaying SLIP Counters
Commands
The SHOW/MONITOR PORT SLIP COUNTERS command displays the various
SLIP counters. To reset the counters, use the ZERO COUNTERS PORT SLIP
command.
SHOW PORT SLIP COUNTERS Display
The following example shows a typical SLIP counters display:
Local> SHOW PORT 5 SLIP COUNTERS
Port 1: Rick Server: Servername
Connect Time: 0 00:00:00
Bytes Received: 0 Bytes Sent: 0
Packets Received: 0 Packets Sent: 0
Receive Packets Lost: 0 Send Packets Lost: 0
Send Packets Queued: 0
SLIP COUNTERS Display Fields
The following table describes the information in the SLIP Counters display:
Field Description
Connect Time Length of duration of the SLIP session. This is 0 if there
is no SLIP session.
Bytes Received Number of bytes received by the access server from the
SLIP host on the port.
Bytes Sent Number of bytes sent by the access server to the SLIP
host on the port.
Packets Received Number of IP packets received by the access server
from the SLIP host on the port.
Packets Sent Number of IP packets sent by the access server to the
SLIP host on the port.
Receive Packets Lost Number of receive IP packets lost due to framing
errors.
Send Packets Lost Number of send IP packets lost due to lack of buffers.
Send Packets Queued Number of IP packets in a queue to be sent to the SLIP
host on the port.