Managing Load Hosts 4-9
DSVCONFIG
DSVCONFIG
Introduction
DSVCONFIG is a menu-driven command procedure that runs on DECnet Phase IV
and DECnet/OSI ULTRIX load hosts. This procedure enables you to:
• Store configuration data about the access server in the DECnet node databases.
• Downline load the software image from the load host to the access server.
• Upline dump memory contents from the access server to the load host.
DIGITAL provides DSVCONFIG as part of the access server software. For
information about installing DSVCONFIG and adding a new access server, refer to the
installation guide provided with the access server software.
DECserver Configuration Procedure
When the DSVCONFIG menu displays:
DSVCONFIG Menu
The following figure shows the DSV$CONFIG menu:
Menu of Options
1 - List known DECservers
2 - Add a DECserver
3 - Swap an existing DECserver
4 - Delete an existing DECserver
5 - Restore existing DECservers
CTRL/Z - Exit from this procedure
Your selection?
Step Action
1
Type the selection that you want and press the Return key.
2
Enter the information at the prompts that appear on the screen.