Filter
Top Products
Configuring and Managing Telnet Servers 13-11
Configuring a Telnet Listener
Configuring a Telnet Listener
Introduction
Perform the following steps to assign a Telnet listener to one or more devices attached
to access server ports:
Step Action
1
Assign a TCP port to the access server port. The access server uses 23,
and 2001 to 2032 as TCP port numbers. The TCP port number is the
number that users on the TCP/IP network use to connect to the device
on the access server port.
2
Determine which access server port or ports are to be assigned to the
Telnet listener.
3
Provide an identification string that helps users recognize and use the
resource. It can be up to 40 characters in length. The factory-set default
is no identification string.
4
Enable the listener to receive connections. The factory-set default for
CONNECTIONS is DISABLED.
5
Specify the individual access server session characteristics, as described
in the Configuring Telnet Server Session Characteristics section in this
chapter.