Filter
Top Products
Watchdog Timer Operation
10-6
Watchdog Timer
10.2.5 Operation in Low-Power Modes
The MSP430 devices have several low-power modes. Different clock signals
are available in different low-power modes. The requirements of the user’s
application and the type of clocking used determine how the WDT should be
configured. For example, the WDT should not be configured in watchdog
mode with SMCLK as its clock source if the user wants to use low-power mode
3 because SMCLK is not active in LPM3 and the WDT would not function.
When the watchdog timer is not required, the WDTHOLD bit can be used to
hold the WDTCNT, reducing power consumption.
10.2.6 Software Examples
Any write operation to WDTCTL must be a word operation with 05Ah
(WDTPW) in the upper byte:
; Periodically clear an active watchdog
MOV #WDTPW+WDTCNTCL,&WDTCTL
;
; Change watchdog timer interval
MOV #WDTPW+WDTCNTL+SSEL,&WDTCTL
;
; Stop the watchdog
MOV #WDTPW+WDTHOLD,&WDTCTL
;
; Change WDT to interval timer mode, clock/8192 interval
MOV #WDTPW+WDTCNTCL+WDTTMSEL+WDTIS0,&WDTCTL