Timer_A Operation
11-14
Timer_A
Output Example—Timer in Up Mode
The OUTx signal is changed when the timer counts up to the TACCRx value,
and rolls from TACCR0 to zero, depending on the output mode. An example
is shown in Figure 11−12 using TACCR0 and TACCR1.
Figure 11−12.Output Example—Timer in Up Mode
0h
0FFFFh
EQU0
TAIFG
Output Mode 1: Set
Output Mode 2: Toggle/Reset
Output Mode 3: Set/Reset
Output Mode 4: Toggle
Output Mode 5: Reset
Output Mode 6: Toggle/Set
Output Mode 7: Reset/Set
TACCR0
TACCR1
EQU1 EQU0
TAIFG
EQU1 EQU0
TAIFG
Interrupt Events