Xerox 7345 All in One Printer User Manual


 
89
5. Setting S/MIME (Security), if desired.
a. From the Connectivity & Network Setup list, select Security Settings. If the selection is not
visible, use the scrolling arrow to display it.
b. Select S/MIME Settings and set the following items.
Device Certificate - S/MIME
Link a certificate to the machine. You MUST have an S/MIME certificate on the machine to
perform encryption. For information on S/MIME certificates, refer to the Configuration of E-mail
Encryption/Digital Signature topic in the Security section in this guide.
S/MIME Communication
Set whether to enable or disable S/MIME Communication when a certificate ID is set.
Receive Untrusted E-mail
Set whether to receive untrusted E-mail or not.
Receive Untrusted iFAX - if available on screen.
Set whether to receive untrusted iFAX or not.
Message Digest Algorithm
Select a message digest algorithm from [SHA1] or [MD5].
Message Encryption Method
Select a contents encryption method from [3DES], [RC2-40], [RC2-64], or [RC2-128].
Digital Signature - Outgoing E-mail
Set whether to always attach a digital signature to E-mail or to select a digital signature when
sending E-mail.
Digital Signature - Outgoing iFAX - if available on screen.
Set whether to always attach a digital signature to iFAX or to select a digital signature when
sending iFAX.
Certificate Auto Store
Select whether or not to automatically store a S/MIME certificate attached with the E-mail when
receiving E-mail sent from an address registered in the address book.