Filter
Top Products
274
5. If the correct Port is being used by the driver but you are still unable to print, perform the following
procedure. In Windows 2000/XP, follow the instructions for TCP/IP Peer to Peer (LPR) Printing, under
the Print Drivers Tab of this guide, to verify that Print Services for Unix are installed in the
workstation.
6. Note that access to this Device's Services can be restricted by Host IP addresses. As this feature
could cause communications to appear to fail in certain instances, see the IP Filtering procedure in
the Nos Selection section of this guide for further details.
7. To assure successful printing, make sure that the Device is configured to support the Page Description
Language (PDL) being used by your driver. To check the PDL being used by the driver, print a test job
"to file." Open and view the job in a program such as Notepad. The PDL being used by the driver will
be displayed in the first few lines of Printer Language. Next, check the Page Description Languages
being supported by the Device's ports by following the instructions supplied under the Setting PDL
Emulations procedure in the Internet Services section of this guide. The PDL being used by the driver,
and the PDL supported by the Port you are printing to, MUST match for successful printing to occur.