Xerox 7345 All in One Printer User Manual


 
258
TCP/IP Configuration Selection List
As displayed on your screen, the following selections are available for TCP/IP Configuration.
IP Mode
Select the IP Mode that applies to your network environment.
General
Host Name. The default entry assures a name that is unique to this device on the network.
IP Address Resolution. Use this drop-down menu to select the method to use to assign IP
Addresses. Select Static, DHCP, RARP, BOOTP, or DHCP/Autonet.
Note that with the Autonet option selected, if a Windows 2000 client can’t contact the DHCP
server, it will assign itself an IP address from the 169.254.0.0 class B address space. This is also
known as zero configuration, or Bonjour, networking. Make sure to check the Enabled box for Self
Assigned Address at the bottom of your screen.
IP Address entry box. To be filled in manually ONLY when Static addressing is selected.
Subnet Mask entry box. To be filled in manually ONLY when Static addressing is selected.
Gateway Address entry box. To be filled in manually ONLY when Static addressing is selected.
Domain Name
Enter the fully qualified domain name here. For example: xerox.com.
DNS Configuration
DNS Server Address Resolution check box. If enabled with a check mark, the Device will contact
the DHCP Server for the IP Addresses of up to three DNS Servers. If unchecked, this information
must be entered manually.
Three DNS Address boxes are supplied for the manual entry of DNS Server addresses.
Dynamic DNS Update Box. If your DNS Server does not support dynamic IP address updates
there is no need to enable this checkbox. Check the Overwrite box to enable DNS information
overwriting.
Generate Domain Search List Automatically. A check box is provided for enabling automatic
Domain searches.
Domain Names 1,2,3. Three text boxes are provided for the entry of Domains to search (for
example, Xerox.com).
Connection Timeout. An entry box is provided for entering a Timeout for searches of Domains.
Zero Configuration Networking
Used with DHCP/Autonet selected from the IP Address Resolution drop-down menu, when this
box is checked the device will assign itself an IP address from the 169.254.0.0 class B address
space.
Note: Changes to TCP/IP settings will not be applied until you restart (reboot) the Device.