Filter
Top Products
163
Setting up a Remote Template Pool Repository (optional)
1. At your workstation, open your Web browser and enter the IP address of the machine in the Address
or Location field. Press Enter.
2. Click the Properties tab.
3. Click the Services folder, then the Network Scanning file folder.
4. Click the Advanced folder, then click the Template Pool Setup link.
5. On the Template Pool Setup page, in the Remote Template Repository area:
a. In the Protocol drop-down box, click HTTP or HTTPS.
The Remote Template Repository area refreshes and displays more options.
b. If you are using HTTP:
• On the Host Name / IP Address & Port line, type either an IP Address or Host Name for the
server.
• In the Port Number box (unlabeled), type 80 for the port number.
c. If you are using HTTPS:
• On the Host Name / IP Address & Port line, type either an IP Address or Host Name for the
server.
• In the Port Number box (unlabeled), type 443 for the port number.
• If you are using SSL, click the Validate Repository SSL Certificate (trusted, not expired,
correct FQDN) check box.
d. For either HTTP or HTTPS, if you are using a proxy server:
• Click View HTTP Proxy Server Settings.
• On the Proxy Server page, verify that the settings match those in your proxy server
environment. Make changes as needed, then click Apply.
e. On the Script path and filename (from HTTP root) line, type the script path and filename (from
HTTP root).
Example: /xerox.asp
f. On the Document Path line, type the HTTP address.
Example: /Inetpub/wwwroot/scans/
g. Type the Login Name and Password for the machine.
h. Type the password in the Retype Password box.
i. Click Apply.
6. If prompted. type the administrator User Name and Password and click OK. The default is 11111 and
x-admin.