Filter
Top Products
33
IP Filtering (IP Address Restriction)
1. Open your Web browser and enter the TCP/IP address of the Device in the Address or Location field.
Press Enter.
2. Click the Properties Tab.
3. Click the plus symbol (+) to the left of the Security file folder.
4. Select IP Filtering.
5. In either the IPv4 area or the IPv6 area, complete the following steps.
Note: IPv4 is the traditional (xxx.xxx.xxx.xxx) address space used with TCP/IP networks.
a. To allow universal, unrestricted access to the device, clear the Enabled check box.
b. To restrict access to specific IP Addresses and Subnet Masks:
• Click the Enabled check box.
• Click Add or Edit to add or edit an IP address from which you intend to accept jobs. Click
Apply.
Note: IP filtering will not work until at least one IP address has been added. This prevents
turning off ALL access to the device.
• Click Delete to delete an IP address. Click Apply.
6. Click Apply when done.
7. Send a test job.