Filter
Top Products
150
14. Press the rectangular Change Settings button.
15. Use the touch screen keyboard to enter in a name for your Mailbox.
16. When finished entering in a name, press the Save button in the upper right corner of the screen. (To
exit the screen, without saving changes, press the Cancel button.)
17. On the Mailbox settings screen, press any other selection lines of interest and use the Change
Settings button, as previously described, to access and make setting changes. Use the Save button
to save your changes.
18. To link this Mailbox with your Job Flow Sheet, touch Link Job Flow Sheet to Mailbox and touch
Change Settings.
19. Touch Create/Change Link to set the Mailbox link to a previously-created Job Flow Sheet. Note: If no
Job Flow sheets are displayed, press Create to create one and follow the instructions supplied in the
Creating Job Flow Sheets topic in this section.
20. Select your Job Flow Sheet from the list (clicking Refresh, if necessary) and touch Save.
21. Touch the Auto Start checkbox to place a checkmark in the box for automatic processing of
documents as they are received in the Mailbox.
22. To exit the Link Job Flow Sheet to Mailbox screen, press the rectangular Close button in the upper
right corner of the screen.
23. To exit the Mailbox settings screen, press the rectangular Close button in the upper right corner of the
screen.
24. To exit the screen that lists all assigned and unassigned Mailboxes, returning to the Tools tab screen,
press the Close button.
25. Wait several seconds for the Auto Clear service to log you out.