Filter
Top Products
27
IPv4 IP Filter (IP Address Restriction)
1. Use your workstation's web browser to access the Internet Services (web pages) residing on the
Device to set the IP Address or Addresses to use with this feature BEFORE enabling the feature,
either here or with Internet Services. This will prevent unintentionally locking yourself out from
communicating with the Device from your own IP address. For full instructions, refer to the IP
Filtering (IP Address Restriction) topic in the Internet Services section of this guide.
2. In the Protocol Settings menu, press the selection line labeled IPv4 IP Filter.
3. Press the Change Settings button.
4. On the settings screen, note which of the two buttons is highlighted as the current setting for IP
Address restriction. The available settings are Enabled or Disabled. Disabled is the factory default
setting.
5. To change settings, press your setting of choice, then press the Save button.
6. To return to the Protocol Settings menu, without making changes, press the Cancel button.