Filter
Top Products
53
NetBIOS over IP Client/Server Printing
Before You Start
1. Obtain the Print Driver for your workstation's operating system. Drivers are available on one of the
CD-ROMs that came with your Device. They are also typically available for downloading in self-
extracting Zip file format from the Internet at www.xerox.com.
2. Print a Configuration Report as stated under the Network Connectivity Tab of this guide.
3. On the Configuration Report, verify that "SMB" is enabled. Also, verify that TCP/IP is enabled as
one of the supported protocols. To enable "SMB," if required, follow the procedure stated under the
Microsoft (NetBIOS over IP) item of the NOS Selection menu, accessed from the Network
Connectivity Tab of this guide.
4. The Workstation Print Driver Installation Procedures below ASSUME that you have already Set Up a
Server to Queue Jobs to the Printer. If you have NOT already set up a Server, for a quick-step set up
procedure, refer to the instructions supplied under the selection "Microsoft (NetBIOS over IP)," located
in the NOS Selection menu, under the Network Connectivity Tab of this guide.