Filter
Top Products
191
LDAP Authentication
To set LDAP authentication:
9. Click the Properties tab, click the Connectivity folder, click the Protocols folder, then click the LDAP
folder.
10. In the LDAP folder, click the LDAP Authentication link.
11. On the LDAP Authentication page, in the LDAP Authentication box:
a. On the Authentication Method line, either:
• Click Direct Authentication to set authentication with the LDAP server with the user name
and password entered by the user, or
• Click Authentication of User Attributes to set authentication with the LDAP server to the
attributes listed on this dialog, such as samAccountName.
b. On the Attribute of Typed User Name line, type “mail”.
c. On the Attribute of Login User Name line, type “samAccountName”.
d. Regarding text strings, unless you are very familiar with LDAP, do not add text strings to the User
Name.
e. Click Apply, then reboot the device at the prompt.
12. Continue with the next procedure to set LDAP Group Access.
LDAP Group Access
To set LDAP Group Access:
13. Click the Properties tab, click the Connectivity folder, click the Protocols folder, then click the LDAP
folder.
14. In the LDAP folder, click the LDAP Group Access link.
15. On the LDAP Group Access page:
16. In the Color Authorization area, on the Color Access Group line, type
CN=Color,CN=Users,DC=crmttrinity,DC=lab
17. Click Apply, then reboot the device at the prompt.
18. Continue with the next procedure to set Authentication Configuration.
Authentication Configuration
To set Authentication Configuration:
19. Click the Properties tab, then click the Security folder.
20. In the Security folder, click the Authentication Configuration hot link.
The Properties tab refreshes and the Authentication Configuration > Step 1 of 2 page appears.
21. On the Authentication Configuration > Step 1 of 2 page, in the Authentication Configuration box:
a. In the Login Type drop-down list, click or verify Login to Remote Accounts.
b. On the
Mailbox to PC / Server line, click or verify the Enabled check box.
c. On the Non-account Print line, ensure that the Enabled check box is NOT checked if you wish to
enable people without accounts to continue to print.
d. On the Guest User line, in the drop-down list box, click or verify Off.
22. Click Apply, then reboot the device following the prompt.
23. Continue with the next procedure to set Authentication System