Filter
Top Products
67
e. Click [Apply].
f. If changes were made to the SSL settings you may need to:
• Reboot the system.
• Close and reopen the client browser.
5. To enable the ports:
a. Click the [Properties] tab.
b. Click the [Connectivity] folder, then Port Settings.
c. On the SNMP line, click [Enabled].
d. On the SMB line, click [Enabled].
e. On the FTP Client line, click [Enabled].
f. On the SOAP line, click [Enabled].
g. Click [Apply].
If changes were made to the SSL settings you may need to reboot the system.
6. To ensure that IPv4 is enabled by default:
a. Click the [Properties] tab.
b. Click the [Connectivity] folder, then the [Protocols] folder.
c. In the [Protocols] folder, click [TCP/IP].
d. In the IP Mode area, on the IP Mode line, click or verify IPv4.
e. If you clicked IPv4, click [Apply].
EIP applications can now register to the device.
f. You may need to map buttons to Custom Services at the Local User Interface in order to see the
new applications.